AllSats ... World of Enigma
07 September, 2010, 04:54:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Satellite Superstore .. for all your Satellite Needs  http://www.satellitesuperstore.com/cat.htm
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: itgate tgm220 sat tuner problem  (Read 349 times)
0 Members and 1 Guest are viewing this topic.
bakool
Member
*

Reputation +0/-0
Offline Offline

Posts: 5


Awards
« on: 28 July, 2010, 12:04:06 PM »

hello

2 days back my TGM 220S is getting nothing from the LNB
i tied another receiver and my installation is working well it looks like my itgate had problems
i tried hotbird ,the itgate is able to get some channels but not all of them,badr and nilesat nothing not able to get any signal so i understood that may be the tuner is partially dammaged i mean can get only some frequencies
do u think that my guess is right,would the replacement of the tuner will solve the problem  ,if you got the same issue wish was solved by the replacement of the tuner or any other tip please advise
thanks and best regards

 i m runing UKUR 7.9
my receiver is connected to 3 LNB via disecq switch








Logged
Doume
Master Developer
God-Like Member
*****

Reputation +10003/-0
Offline Offline

Posts: 762



WWW Awards
« Reply #1 on: 28 July, 2010, 12:13:17 PM »

I suggest to check voltage on power supply, because it's a known issue on this kind of receiver

Logged

TM 9100 super : Doume2015r2
TGS110 : Doume 2015r2 in flash, JiBoot
TGM220 : Doume 2015r2, JiBoot on USB
DM 7020S : HDD 120 GB, PLi Jade in flash (NFS server)
DM 8000 HD PVR , DD 500 GB
VU+Duo
ABCOM IP 9000 HD ( DVB-S2 + DVB-T )
QBoxHD :real shit !
AZBox in evaluation : I like it
bakool
Member
*

Reputation +0/-0
Offline Offline

Posts: 5


Awards
« Reply #2 on: 28 July, 2010, 01:50:39 PM »

thks doom for your quick answer
actually i do not have any schematic to follow for the power supply voltage check
just for info the receiver is starting properly ,front display is giving display and i installed the last nemisis image looks fine connecting to internet menu is working well so if you have sme schematic please tell me what voltage in what pin

thanks doume for your quick answer and best regards
Logged
jimux
Beta Tester
God-Like Member
****

Reputation +7011/-0
Offline Offline

Posts: 2787



Awards
« Reply #3 on: 28 July, 2010, 02:32:36 PM »

Does it read SD cards OK.  The power supply to the card is fed from the motherboard (not direct like the internal disk) and should be 5v when awake and about 3.25v when in standby.  it is a push-on keyed two pin plug/socket.   I had a problems a couple of years age.  It bugged me for months before I sorted it by a factory reset and install a modern image.
Logged

TM9100 & TM800HD linked to 100Mhz ethernet Linux LAN (SUSE 11.2, DSL, Puppy)- A Microsoft-free zone. 9100 with EDG4.4 in flash,  DS +others in iBoot, 32Mg swap on SD. 100cm dish with H-H motor,Fixed 80cm dish
bakool
Member
*

Reputation +0/-0
Offline Offline

Posts: 5


Awards
« Reply #4 on: 29 July, 2010, 10:03:10 AM »

the tgm220 has no SD card
even a factory reset and a modern image is giving no results
thks m8y
Logged
cyprusdunc
Administrator
Sat Mad Nutter
*****

Reputation +13907/-0
Offline Offline

Posts: 4098



Awards
« Reply #5 on: 29 July, 2010, 10:34:59 AM »

Hopefully someone will be along that can tell you where to get a replacement tuner,because from what you are doing it does seem to be that component, Dunc.
Logged

TM9100  250GB HDD 1GB SD flash edg nem 4.4
TM 9101 150 GB HDD 2GB MMC flash edg nem 4.4, boot  now empty
Itgate TGM 220 UR 7 VER 1
DM 800 HD Oozoon lean flash  Edg-Nemesis 1.0 HD boot
TM 800HD
slystar 2 pci card
 V box 2,
1.8 MEGA DISH,18 INCH SUPERJACK2 actuator
INVACOM c120 quad lnb
cyprusdunc
Administrator
Sat Mad Nutter
*****

Reputation +13907/-0
Offline Offline

Posts: 4098



Awards
« Reply #6 on: 29 July, 2010, 10:36:22 AM »

Just a thought,have you checked all your connections from the lnb to the box?and is your dish alignment ok,  Dunc.
Logged

TM9100  250GB HDD 1GB SD flash edg nem 4.4
TM 9101 150 GB HDD 2GB MMC flash edg nem 4.4, boot  now empty
Itgate TGM 220 UR 7 VER 1
DM 800 HD Oozoon lean flash  Edg-Nemesis 1.0 HD boot
TM 800HD
slystar 2 pci card
 V box 2,
1.8 MEGA DISH,18 INCH SUPERJACK2 actuator
INVACOM c120 quad lnb
bakool
Member
*

Reputation +0/-0
Offline Offline

Posts: 5


Awards
« Reply #7 on: 29 July, 2010, 11:34:01 AM »

i did checked by installing a HUMAX free to air basic receiver and my installlation is working properly all the satellites are there
for the tuner i found a placee in spain in this forum i ll order from there
Logged
bakool
Member
*

Reputation +0/-0
Offline Offline

Posts: 5


Awards
« Reply #8 on: 31 July, 2010, 02:16:03 PM »

again another question
in case the replacing the tuner do not work i m planing to get a TGS 100,is it worthy or better to get another TGM220
thks
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!