motor settings

[dyna]

hi i have a new dm800 hd clone( hope you dont mind clones here) and when setting up motor i cabt see the gotox function anywhere, this is what ive been useing on my dm 500 and have no props. i can input my log/lat but the dish wont move if iclick on channel on a different sat not sure what im doing wrong but any help welcome! ps i can get the dish to move if i click on satfind and select a satalite and then i can look for channels on that sat.

[jimux]

We are all clones here.  This topic has been covered before so use the search to have a browse while our DM users are struggling to get out of bed.  Here are a couple to start with.

Start with http://www.allsats.co.uk/index.php?topic=9836.0

http://www.allsats.co.uk/index.php?topic=10375.0

[dyna]

good start mate thanks, to cold to be rushing out of bed!

[basilyoung]

the 800 (clone or not) is very different to the 500 series (and a lot better as well)

you need to set the tuner to "simple" select "positioner" put in your east or west /north setting...use sat finder to move between a few sats, ie; 19/13 east

and adjust your east west settings to get the best sig strengths

hope this helps

baz

[voyger]

dyna if your log/lat is not spot on the dish will move out of position every time you change sat
get your log/lat from google map from google point to your hose you should have accurate number position..and still you have to tickle the number on log/lat to get spot on...remember the 800 is different from the 500 as  basilyoung said. patient patient you will get in there
as i done